|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
3.5x2.8 mm SMD CHIP LED LAMP AA3528SYC SUPER BRIGHT YELLOW Features SINGLE COLOR. SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER PROCESS. AVAILABLE ON TAPE AND REEL. IDEAL FOR BACKLIGHTING. PACKAGE : 1500PCS / REEL. RoHS COMPLIANT. Description The Super Bright Yellow device is made with DH InGaAlP (on GaAs substrate) light emitting diode chip. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD1231 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE:MAR/09/2005 DRAWN:Y.CHENG PAGE: 1 OF 4 ERP:1201000411 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20mA Min. AA3528SYC SUPER BRIGHT YELLOW (InGaAIP) WATER CLEAR 36 Typ. 120 Viewing Angle 21/2 120 Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25C Symbol peak D 1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Super Bright Yellow Super Bright Yellow Super Bright Yellow Super Bright Yellow Super Bright Yellow Super Bright Yellow Typ. 590 588 28 25 2.0 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Super Bright Yellow 125 50 150 5 -40C To +85C Units mW mA mA V SPEC NO: DSAD1231 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE:MAR/09/2005 DRAWN:Y.CHENG PAGE: 2 OF 4 ERP:1201000411 Super Bright Yellow AA3528SYC SPEC NO: DSAD1231 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE:MAR/09/2005 DRAWN:Y.CHENG PAGE: 3 OF 4 ERP:1201000411 AA3528SYC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: D If there is sorting requirement (eg. forward voltage, luminous intensity or wavelength), the condition as follows: 1.Wavelength: +/-1nm (Test condition is based on the sorting standard). 2.Luminous intensity: +/-15% (Test condition is based on the sorting standard). 3.Forward voltage: +/-0.1V (Test condition is based on the sorting standard). SPEC NO: DSAD1231 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE:MAR/09/2005 DRAWN:Y.CHENG PAGE: 4 OF 4 ERP:1201000411 |
Price & Availability of AA3528SYC |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |